Pruning Nectarine Trees

How to Correctly Pruning Nectarine Trees: A Simple Guide

Everyone is familiar with the fruit called nectarine. This is a really delicious fruit. But what about nectarine trees? Before you get ripe and delicious fruit, you need to grow a healthy tree that will bring a good harvest.

Then pruning will be the most important factor that will affect this. In this article, we will describe the correct method of pruning nectarine trees.

Read This Before Pruning Your Nectarine Tree

The main factor you should take into account is knowing what hardiness zone you live in. This can help you to know which time of the year is ideal for you to prune the nectarine tree.

Check the picture below.

Pruning Nectarine Trees

Find your hardiness zone HERE

Without this knowledge, you’ll not have more fruits or you will have a dead fruit tree.

How much should I prune nectarine tree?

Ideally, if you want to encourage vegetative growth of the tree and have a healthy growth of the tree in common, healthy and rich harvest perform pruning of the tree every year.

When to prune nectarine trees?

You can choose lat trimming trees in winter, early spring (after the ground has begun to thaw, but before your nectarine tree has buds growing on it), or late summer (after a harvest) to prune your nectarine tree.

10 Effective Tips For Pruning Nectarines

Yes, you already know that pruning the tree is an important process. But what about how to do it correctly? This process can be quite difficult if you do not have the relevant knowledge and at the same time, it will not be difficult for you to do a tree pruning if you are well aware of this issue.

So, catch 10 useful tips that can help you to perform pruning of the tree.

1. Don’t hesitate with nectarine tree pruning

Do not hesitate with pruning the tree, because when you just plant your tree and do the pruning of branches decides whether your tree will be strong and healthy and whether it will bring you good nectarines.

Try to think about the future shape of your tree more when pruning. You may be surprised but when doing this step you are pruning a lot of wood.

Plant growth, fruit growth, and fruit size are determined after this procedure is performed.

2. First you have planted the tree, prune this in winter

It will also be great if you perform pruning of the tree in the first winter after planting it. You will need to leave only those few fruiting wood branches that will really bear nectarine fruit.

3. Prune Every Year

Prune the tree every year during the dormant season, also leaving only those branches that really give the harvest. It helps to be sure that next year’s crop will be healthy and rich.

4. Do not be confused about branches

One of the most important tips is to make sure you prune any branches that are coming off of your Fruiting Wood that does not point outwards. If it points inwards, cut it. If it points out horizontally, cut it.

5. Prune Dead Wood

It is necessary to prune diseased branches, discolored, or dead wood (often without leaves and fruits), as well as areas without bark. Also, an early indication of the ill wood is key. Hardened sap on the wood is the first factor of the ill plant. Start pruning it immediately to prevent your whole plant from death.

6. Prune Suckers

Suckers are real evil for your tree, because they grow from the tree root system, while they do not bear fruit and take away nutrients and water. Get rid of them.

7. Prune Secondary Branches

How to Correctly Pruning Nectarine Trees

Cut off excess secondary branches (every branch that is growing at less than a 45-degree angle) that do not have harvest but only take valuable nutrients from more important main branches.

8. Prune Fruiting Wood

Sometimes it is necessary to prune the branches that give the harvest too if you want to get a rich harvest. Cut off 1/3 or 1/4 from the main branch.

9. Prune Non-Fruiting Wood

Non-fruiting wood is your real enemy. All new growth and new branches must be pruned as well if there is no harvest on them. To help a plant produce more fruit you should leave only those branches that will give the harvest.

Cut it off and don’t regret it!

10. Don’t Forget About Distance

There should be 10-15 inches between your fruit-bearing branches. There shouldn’t be pointing inwards branches or intertwined with each other branches.

Useful Video: How to Correctly Pruning Nectarine Trees

How to Correctly Pruning Nectarine Trees

Now we can share with you detailed instructions on how to prune nectarine trees correctly.

Pruning fruit trees should not be ignored by you. With this procedure, you help the nectarine tree to be strong, healthy, stress-resistant to cold. Also, this procedure is responsible for healthy growth, what the harvest will be, whether the fruits will be large, what their quality will be.

Pruning Nectarine Trees
How to Correctly Pruning Nectarine Trees

So, let’s go.

Tools you’ll need

Obviously, before you start to do the following actions we should say that first, you’ll need to prepare some necessary tools.

– Secateurs to prune small branches

– Pruning saw for larger branches

– Chainsaw for larger branches

– Sharpening tools

– Wire

– Chlorine bleach and water

– Lime sulfur

– Latex paint

– A ladder

Learn how to properly clean your pruners in the video below:

How to Clean and Sharpen Pruning Tools

Disinfect your tools

You may be surprised, but disinfection when pruning the nectarine tree is also an important procedure. It turns out that non-disinfected tools can cause the spread of pathogens and bacteria.

In order to properly disinfect your tools, you will need to create a special solution.

Imagine a liquid in a container.

Divide the entire volume of liquid into 10 parts.

One of these parts should consist of chlorine bleach, and the other nine should be water.

Disinfect your instruments with this solution for 30 minutes.

Then you can proceed to the next step.

Cut the trunk

Look at the top of your plant which is growing from the trunk. Visually imagine or measure how much will be 60-75 cm from the beginning of the top of the plant. Cut it off. It also has a beneficial effect on plant growth, fruit growth, the root system, vegetative growth, and nutrients/water circulation.

Trim the bigger branches

So, you have already correctly performed all the actions listed in the step described above, but what to do next?

And then you will have to pick up the pruner again. Use it and get rid of all small or large branches without regret except for the two main branches. These two branches are the tallest ones growing from the trunk of the tree. They are also called scaffold branches. You have to form a V-shape (also seems like Y-shape) with these scaffold branches.

This procedure helps the tree absorb more sunlight.

Secure the highest branches

Now take the wire. You should use the wire to create a Y-shape between the two highest scaffold branches and the trunk. It helps to keep them stable. At the same time, you need to make sure not to overdo it, otherwise, the overstretched wire will prevent the branch growth.

Do not think that after first pruning you do not need to prune your nectarine tree then. You have to prune young trees mandatory for the first three years after planting.

Now you have to look at your Y-shaped scaffold branches and find the trunk’s extension above. Cut it off and do not forget to hold your tool at a 45-degree. This procedure is necessary if you want to distribute nutrients to its lower parts and encourage vegetative growth.

Then you can wait until January. Then you have to cut back on new branch growth. These are lateral branches that grow out of the scaffold branches. Prune these branches growing from scaffold branches to the collar or base at 45 degrees.

Don’t let your tree get sick. You may ask how to determine this. Very easy. The first sign that your tree is starting to get sick is the gumming that appears. They are formed due to the leaking juice. And the juice appears from the damage. Injuries signal illness. Trim the places with gumming.

Cut down the smaller branches

We said above that getting rid of suckers is also an important step on the way to growing a healthy plant. Suckers prevent your nectarine tree from getting all the nutrients and water in full. These small branches grow from the base of the tree but do not have a harvest. You don’t need them, so cut suckers back to the branch collar.

Cut to the branch collar at a 45-degree angle as well.

Actually, you don’t need branches that grow downwards. These branches at first seem to bear fruit, but you will notice that time after time there will be less fruit and the branches will only eat nutrients and water once again, which in turn will not go to the fruit-bearing branches.

You should prune such branches at the point where they tend to grow downwards to encourage horizontal growth and fruit production.

Your plant does not need many small branches that do not have a harvest. In order to determine at the beginning where the fruit will grow and where only the leaves and branches are, pay attention to the buds.

If there are two or three buds in one place, then this indicates that fruits will soon appear in their place, and if you see only one, it will be a leaf or branch that is being born. If you find one bud, cut off the branch heading slightly higher from this bud.

Protect your nectarine tree

You know that despite all the good sides of pruning a tree, this procedure causes a lot of stress to the plant. To protect it from insects and disease, lubricate the trunk with latex paint.

Pruning Nectarine Trees

Final words

Fruit-strewn trees are the dream of every gardener. It is possible to realize it only under the condition of competent and full-fledged care of plantings. Competent pruning of trees is especially important, without which their normal growth and development are impossible. In this case, there is also no need to wait for a plentiful harvest.

Now you know all the details concerning this problem and are also familiar with the detailed instructions on how to prune your nectarine tree.

We hope we helped you. We wish you good harvests!

Trimming Trees in Winter

A Gardener’s Guide to Trimming Trees in Winter

I bet almost all of us are used to the idea of cutting trees in summer, everyone usually imagines a picture of a gardener or a housewife trimming shrubs, but have you heard about trimming trees in winter? You may amazed, but this way of cutting plants has lots of advantages compared to trimming in summer. Pruning trees in winter not only helps remove unsightly dead limbs but also promotes “strong new shoot growth” for better spring bloom, according to the Arbor Day Foundation.

Let’s dive into the topic and learn what pluses and minuses each method of trimming has.

What is the difference between trimming and pruning?

Before we start telling you about differences in the time of cutting trees and shrubs, it is necessary to explain the ways of cutting themselves.

These 2 terms – trimming and pruning – seem to have absolutely the same meanings. However, it is wrong: although the actions are similar, the purpose, the tools, and frequency of procedures are different.

Pruning

Trimming Trees in Winter

Pruning is the process of cutting branches and leaves in order to remove diseased and dead parts of a tree. The tools used for pruning include hand pole saws, shears, and lopping shears. The procedure of pruning is done quite rarely.

Trimming

Trimming Trees in Winter

Trimming is the process of cutting branches and leaves for improving the look of a tree. Trimming is done frequently because leaves and branches grow fast spoiling the general look of a tree all the time. The tools used for trimming include saws, hedge trimmers, and hedge shears.

Benefits Of Trimming Trees In Winter

A more distinguishable tree structure

When leaves fall off deciduous plants, it is much easier to find all the damaged or diseased branches. You don’t have any obstacles on your way to the wood, so you’re able to see all the trunks and branches freely and prune dead and diseased wood fast and easily.

In order for the branches for growing, you need to make the right cuts in the right places to improve the shape and health of your trees.

Dormant pruning doesn’t spread tree diseases

Trimming Trees

Tree diseases are spread by bacteria, parasites, fungi, and insects. Since these microorganisms are dormant in cold temperatures, winter tree work doesn’t allow the diseases to spread further from plant to plant.

There are kinds of trees which have to be cut in the cold time of the year exceptionally. For example, oak and elm can spread oak wilt and Dutch elm disease respectively.

More comfortable process of work

Cold temperatures in winter result in ground freezing. You can take advantage of this fact by bringing heavy equipment and putting it on the hardened ground. This way, you will feel more comfortable while working and accomplish it faster and more effectively than if you stand on an unreliable ladder being afraid of falling down all the time.

In case your region is characterized by warm weather in the winter months or it is late winter or early spring, be careful and check the solidity of the ground. It can happen that there’s a fragile layer of ice which can be ruined under the pressure of your heavy equipment.

Trees have less stress

Usually, when you prune trees damaged or diseased branches, a tree tries to recover and regrow cut branches quite fast filling the appeared gap. However, if you do winter pruning, new growth doesn’t begin until the growing season, i.e. until warmer spring temperatures come.

This fact is also explained by the fact trees need more sunlight, nutrients, and water for healthy growth. So, the effect of dormant pruning keeps for a much longer time than the effect of pruning in spring or summer.

A tree has more time to cure itself till destructive insects appear.

A safer territory for you and your household

Winter pruning may be needed not only for improving the look of trees and shrubs and removing dead and diseased wood. Winter pruning cuts may also be needed for removing dead or dangerous branches and trees which jeopardize all the people going around the yard.

If you have such dangerous branches, don’t delay pruning and warn everybody about the trees and fence the trees. Find out who is responsible for cutting overhanging tree branches.

Advantages and disadvantages of trimming trees during spring and summer

Trimming Trees

Trimming and pruning trees in spring or summer has some pluses and some minuses.

Here’s the list of tree work features which warmer weather brings.

Pluses

  • You can see the tree the whole image of trees including leaves. Though when you prune trees the fact that leaves fall off deciduous plants in autumn is great, when it comes to improving the general look of trees, you definitely need to see the whole tree.
  • Spring and summer change both trees and surrounding conditions. That’s why there are tree works that can be done only in the growing season. For example, it is necessary to trim trees in spring and summer to increase air circulation and provide more sunlight for flower buds, fruit, and berries. When trying to increase air circulation, move from the center to the outside parts of a tree. Don’t get too carried away, remove not more than one-quarter of branches not to cause poor growth of a tree.
  • Early spring-flowering shrubs and trees get some buds before winter comes to begin flowering on time. It is necessary to delay pruning till late spring when these shrub and tree species have finished flowering. In the winter months, you just remove all the flower buds.

Minuses

  • New growth of branches and leaves happens quickly.
  • You don’t see tree structure clearly as you do during winter pruning.
  • Pruning cuts may spread tree diseases since unlike cold-weather warmer weather brings conditions suitable for microorganisms such as destructive insects and bacteria.

video: Trimming Trees in Winter

 

When should you not trim trees?

There’s no concrete time of the year when it is forbidden to prune trees, however, there are phases of particular tree species which don’t assume pruning. For example, early spring-flowering shrubs shouldn’t be cut until they finished flowering.

In conclusion, we wish you good luck with trimming trees in winter if you will consider this way of cutting trees expedient and suitable for you.

Cut your own Christmas tree farms near me

Cut your own Christmas tree farms near me : Best Christmas Tree Farms

When the wintertime comes and it is really cold and dark outside, it is just necessary to cheer up a little bit and to bring a cozy Christmas atmosphere to the house. The fact you are here means you have googled something like “cut your own Christmas tree farms near me”, so you already know that one of the best ways of spending time in winter is to go to a Christmas tree farm.

Benefits of Visiting a Christmas Tree Farm

There are a lot of benefits which you will get if you come to a Christmas tree farm.

First of all, you will get a great Christmas tree, of course. If you are a decor lover, then we can not continue because to get one of the real Christmas trees as an addition to your decor is a good enough point to go to such a farm.

There are many kinds of Christmas trees (which may be hard to find in the supermarket) such as White Pine, Virginia Pine, Leyland Cypress, Norway Spruce, Scotch Pine… the list is long!

Secondly, you will attend a place filled with Christmas atmosphere, especially if you visit a cut your own Christmas tree farm decorated Christmas style and including different theme facilities.

Thirdly, you will have a great trip with your family, if they want to join you. It becomes more important in winter when there are fewer places to go for a walk. Trip to choose and cut Christmas trees for Christmas may become a nice family tradition.

Imagine how cool it will be to head to a road trip with your family to cut your own Christmas tree and to walk around a farm at Christmas season making memories.

Fourthly, since some of cut your own Christmas tree farms include great Christmas decorations and each of them has lots of Christmas trees as a minimum, visiting a farm is a cool opportunity to do photo ops both just for capturing the moment and for posting beautiful photos on your Facebook page or on Instagram.

Fifthly, you not only get more holiday fun, but you will also get a much more cool alive plant compared to a fake tree not paying a lot. Tree prices start from $30.00.

And did you know that 4th graders can get free Christmas trees?

So, let’s dive into the topic and figure out what Christmas tree farms are situated next to you!

Best Local Christmas Tree Farms {2021}

Christmas Tree Farms in West Michigan that Let You Cut Your Own Christmas Tree

Bivins Tree Farm

Cut your own Christmas tree farms near me

5085 13 mile road Rockford, MI 49341

U-cut and fresh Pre-cut Fraser Fir Christmas Trees.

U-cut every weekend from 10 am to dusk. Pre-cut any time.

Beautiful Porch Pots, fresh-made wreaths, and porch pot evergreen DIY kits are sold at Bivins Tree Farm.

Bosch’s U Cut Christmas Tree Farm At Country View Nurseries Inc.

Cut your own Christmas tree farms near me

White Pine, Colorado Blue Spruce, White Spruce, Norway Spruce, Blackhill Spruce, Fraser Fir, Concolor Fir, and Canaan Fir.

Choose & Cut Christmas Trees

The farm is owned by a family.

Church’s Tree Farm

Cut your own Christmas tree farms near me

182 136th St., Grant, MI – 231-834-7158

Fraiser Fir, Balsom Fir, & Canaan Fir

Fresh Fraiser Wreaths, Tree Stands and Tree Bags are available.

To get warm, drink a cup of hot cocoa or coffee served in the place.

Hart Tree Farm

Cut your own Christmas tree farms near me

8760 Young Ave NE Rockford MI 49341

Opens for the 2021 season on Saturday, November 20th.

Balsam Fir, Douglas Fir, Korean Fir, Blue Spruce, & Black Hill Spruce, Concolor Fir, Fraser Fir, Scotch Pine, White Pine.

Choose and cut, and fresh pre-cut trees, wreaths, greens, and garland. 

There’s a possibility to pet farm animals and to have free wagon rides.

Horrocks Christmas Trees

Cut your own Christmas tree farms near me

3355 Dildine Road, Ionia, MI 48846

Concolor first, Norway Spruce, White Pine, Hinoki Gold Cypress, Weeping White Pine.

Owned and operated by a family.

Choose & Cut and Pre-Cut trees.

There’s a Garden Center filled with many kinds of beautiful plants.

Janke Tree Farm

Cut your own Christmas tree farms near me

2676 111th Ave. Allegan, MI 49010

Balsam Fir, Canaan Fir, Concolor Fir (White Fir), Fraser Fir, Korean Fir, Norway Spruce (Red Fir), Black Hills Spruce, White Pine.

U-cut and pre-cut Christmas trees.

Enjoy hot chocolate, coffee, and sweets which are available for purchase.

Opening day 2021 is Black Friday – November 26.

Leber Tree Farm

Cut your own Christmas tree farms near me

2439 36th Street, Allegan MI 49010

Canaan Fir, Fraser Fir, Specialty Firs (Grand & Cork bark) – pre-cuts, Spruce (Blue & Engelmann) – limited pre-cuts.

Owned by a family.

There’s a small gift shop with a great selection of fresh-made wreaths and ornaments available for purchase.

Lenderink Tree Farm

Cut your own Christmas tree farms near me

401 House St NE, Belmont, MI 49306

White pine, Douglas fir, Blue Spruce, Balsam Fir, Grand fir, Black Hills Spruce, Canaan Fir.

Hot chocolate with marshmallows and coffee are free every day.

On weekends you can sit around a fire pit and have free wagon rides.

Wreaths are also available.

Christmas Tree Farms Near Chattanooga TN And The Surrounding Counties

Mcdowell’s Big Fork Nursery

Cut your own Christmas tree farms near me

4955 State Highway 27 Chattanooga, TN 37405

Cove Christmas Tree Farm

Cut your own Christmas tree farms near me

654 Kensington Rd Chickamauga, GA 30707

Family-owned farm.

As you can see from the picture, there’s a cool location for taking photos.

Raulston Acres Christmas Tree Farm

Cut your own Christmas tree farms near me

2572 GA-95, Rock Springs, GA

An average 6′ tree cost is about $48 (+tax).

Murray Cypress, Blue Ice Cypress, Carolina Sapphire, Virginia Pine, White Pine, pre-cut Fraser Fir, and Green Giant.

Here you can not only buy a pre-cut tree and cut Christmas trees, there’s an opportunity to donate a tree to troops at military bases across the U.S. and in Guam. The farm takes part in the Trees for Troops program founded by Christmas Spirit Foundation. To donate 1 tree costs $30.00.

Campbell’s Christmas Tree Farm

Cut your own Christmas tree farms near me

7503 Walnut Hills Drive, Harrison, TN

Family-owned farm.

Virginia Pine, White Pine, Murray Cypress, Frasier Fir Christmas Trees – precuts.

Wheeler’s Tree Farm

Cut your own Christmas tree farms near me

1144 Dogwood Valley Road, Tunnel Hill, GA

The farm is also involved in the Trees for Troops program mentioned in the description of Raulston Acres Christmas Tree Farm. Donate a tree to military bases if you wish.

Christmas Carroll Tree Farms

Cut your own Christmas tree farms near me
Cut your own Christmas tree farms near me

7206 Highway 95, LaFayette, Georgia 30728

Family-owned Christmas tree farm.

Leyland and Murray Cypress, Carolina Sapphire, Fraiser Fir

Santa Land Christmas Tree Farm

Cut your own Christmas tree farms near me

2574 Concord Road, LaFayette, GA

Family-owned Christmas tree farm.

Santa Land will open this year as usual on Thanksgiving Day, on the 25th of November.

Thornhill Farms Christmas Trees

Cut your own Christmas tree farms near me

15107 AL-71, Pisgah, AL

Leyland Cyprus, White Pines, Carolina Sapphire, Fraser Firs

You can have a cup of free hot cocoa or hot cider while you wait for your tree to get cut and wrapped.

Moreover, there’s a possibility to go on a wagon ride with your kids, to look at farm animals in the farm zoo, to meet Santa Claus (make sure that Santa visits the farm on the day of your arrival). However, maybe it’s not such a good idea to allow your kid to sit on Santa’s lap because of the coronavirus pandemic.

Little Mountain Tree Farm

3186 Griffith Road, Pikeville, TN

White Pine (Eastern White Pine), Norway Spruce, White Spruce, and Colorado Spruce

Young Road Christmas Tree Farm

Cut your own Christmas tree farms near me

139 Young Rd SW, Cartersville, GA 30120

Owned and operated by a family.

Eastern Red Cedar, Leyland Cypress, Virginia Pine, White Pine, and pre-cut Fraser firs

Open: From The Day After Thanksgiving

Young Road Christmas Tree Farm is the oldest operating Tree Farm in Bartow County.

Coker Tree Farm Georgia

Cut your own Christmas tree farms near me

2280 Macland Rd, Marietta, GA

Fraser Firs, Murray Cypress, and Carolina Sapphires.

Gates will open at 9 am on November 26th!

Camp’s Christmas Forest

415 Kile Rd, Sweetwater, TN

White Pine, Virginia Pine, Scotch Pine, Norway Spruce, Leyland Cypress, Carolina Sapphire Cypress, Murray Cypress.

Opening Day is Black Friday, the 26th of November.

Bluebird Christmas Tree Farm

Cut your own Christmas tree farms near me

985 Brushy Valley Rd, Heiskell, TN

Leyland cypress, Fraser fir, Virginia pine, Norway spruce, Concolor Fir, Nordmann Fir.

You can visit a gift shop and a pavilion to relax in front of a fire, to enjoy a cup of hot chocolate or hot cider, and buy a selection of excellent local jams, honey, and handcrafted items.

Opens for the 2021 season on November 18th. 

How to find a tree farm or lot using the NCTA Real Christmas Tree Locator

How To Pick a Suitable Place For a Christmas tree

If you put your tree at home, make sure that a source of heat is situated far enough from the place meant for the tree. Take into account the height of the tree and the height of your room. The distance between the tree top and the ceiling has to be not less than 1 foot. Most trees have the height between 6 and 9 feet.

If rooms differ by height, maybe you should consider the appropriateness of putting the tree in a higher room or just choose a smaller tree. In case you prefer the second option, don’t forget to measure the tree when you pick it.

How Do I Get Permission To Cut Down Trees?

Nowadays getting a tree cutting permit is possible and available for absolutely everyone!

When the New Year holidays come, you can get permission and cut down the Christmas tree which you like. Your own Christmas tree will bring joy to the whole family!

Obtaining Christmas tree-cutting permits on nearby public land can be done through the U.S. Forest Service (USFS) or the Bureau of Land Management (BLM).

How To Cut a Tree Correctly

After you choose a perfect tree for you, you need to cut it. But how to do it right so as not to bring inconvenience to Christmas tree farm owners or not to get injured?

First, cut a tree as close to the ground as possible. This way, you don’t leave a big stump on a territory of a farm and don’t make your tree too short. In case you think it will be hard for you to cut your own tree, either ask a worker to do it or get a pre-cut tree instead.

After you (or workers) cut your own Christmas tree, the workers shake the tree properly in order to remove all the ground and dirt that could appear at your home. Then your perfect Christmas tree is wrapped up in paper for a further successful trip home.

Transportation Of a Tree

Consider the most convenient way of transportation. Bring a truck if possible, as well as twine, rope, or straps for tying down your tree. The busiest time is when the gates open, so do expect a line for entrance due to limited parking! The line is usually better about 1-2 hours after gates open. Bathroom and portable potty available.

If you’re going to transport a tree with the help of the car, compare the size of the tree and the size of the car.

How To Install a Christmas Tree On a Tree Stand

A convenient way to install a Christmas tree is to buy a base on 1 of the local Christmas tree farms and to use it as a tree stand drilling holes in the tree preliminarily right on the Christmas tree farm. It is better to ask workers to help you drill these holes to be sure in the result.

How To Keep Christmas Trees Alive

Now when you know the answer to the question “What is the best cut your own Christmas tree farms near me?”, you need to learn how to treat a Christmas tree so it doesn’t die for some reason.

The first rule says that you should cut approximately 1 inch of the tree bottom with a handsaw. It is necessary to provide better absorption of water by Christmas trees. Otherwise, after some time since the cut a tree sap crusts over the tree bottom, so it becomes impossible to get nutrition for the tree and it dies. Take into account that even in case your trip is not really long, a tree sap forms anyway.

Fill the tree base with 1 and a half gallons of water and keep this amount constant. Such a big amount is needed to guarantee the presence of water in the base. If there’s not enough water, the tree begins to wither.

As for your safety, we advise you to apply only tested and reliable lights for Christmas trees decoration. But what to do with your real xmas tree after Christmas? We addressed this issue in our next article on the Christmas tree.

Overall

To sum up, one of the best activities to do during the holiday season is to head to a U Cut Christmas tree farm to cut your own tree (or to choose one from pre-cut Christmas trees).

We hope you managed to find Christmas tree farms which suit you.

palm tree root system removal-How to make palm tree root

How to make palm tree root system removal properly

In our article, we will tell you about how to palm tree root system removal properly and after that, you will regarding this field.  Ok, let’s get started to view information about the root system.

Advantages of Removing a Palm Tree Stump

Palm tree stumps may stay around your property for a few good reasons like to serve exterior design in the yard.

  • Additional space for a garden: Palm tree stumps may take up an excellent space to plant new types of floras in your garden. These stumps may also give the tree a chance to regrow if you’re still interested in having a tree. By the way, you can find actual data in recent posts.
  • Spotless green lawn: Having a tree stump in the middle of the green lawn will not sit well with the neatness-conscious homeowners. Meanwhile, potassium nitrate will help you to use chemicals for removal.
  • A flat foundation for new buildings in your yard: Leveling the ground in the process of preparation for building new objects requires removing the stumps as well.
  • A clear field for kids to play around: If you have kids letting them run around a field with a tree stump is not a good idea. Any obstacle may cause accidents, so getting rid of the tree stump is like babyproofing your outdoor area at home.
  • Getting rid of potential animal and insect den: To get rid of the stump will be useful if it provides an ideal spot for these animals to stay on it. Also, note that drainage pipes will be harmed by the stump.
  • Generally improving the look of your garden: Overall, tree stumps don’t look great in a garden.

So, what about palm tree stumps?

Just use stump grinding and you will forget about problems.

Digging out the root ball

This will be hard work in the first instance, but it means the tree removal is complete in one step. You will need to dig around the stump – not close up, but 6-12 inches away – and then make a trench of about a foot deep. You need a lot of water to work with the roots. From here, you can start to dig underneath the stump and lever it out.

Well, the tree’s roots will be removed properly. This has the effect of chopping the roots which remain in the ground, ending their nutritional supply. Simply spread this method. Apart from it, buy stump grinder and apply for works.

How deep are palm tree roots?

Palm Tree Root System Removal

Palm tree roots grow about 36 inches deep within the topsoil area with a horizontal growth pattern. Take into account the holes. The roots remain narrow and maintain a shallow depth even as they elongate. So, adventitious roots are important to know.

If you’re growing a queen palm in your yard, you want to know how far the roots of a queen palm tree grow. While the tree can be big, the roots spread at a depth, not more than 24 inches. All the horizontal roots have access to water and nutrients. Just try to dig out the palm trees.

Removing Palm Tree Roots

If the roots of your palm trees are invasive and pose risk to other structures where the plant is growing, removal may be necessary. Don’t forget to spread this useful information. Uproot the stump and the root carefully in your yard.

The tree stump grinders are an important part of the main method, as you know.

To remove a palm tree root, dig around the trunk with a shovel to remove about 20-25 inches of soil surrounding the tree. This will give you access to the roots, so cut them off with an ax and then dig up any big roots that may remain. People need to remove a palm tree properly.

video:

The roots of the palm

The tree can grow back, apply a herbicide that’s strong enough to kill off a palm tree and prevent it from growing again. The holes should be defined to remove the stumps effectively.

Do palm tree roots grow back?

Not all varieties of palm trees can grow back after the trunk is cut. Those that grow back are clustering palms, which are known to sprout new stems from roots once the trunk is cut off. Just make roots exposed and forget about the problem.

For most of the other varieties of palm trees, cutting the trunk will mean the tree will die, so make sure you’re cutting down your palm trees for wood or other uses because they will not grow back. Search other trees in your yard.

The roots of the trees usually regenerate

It is why you can cut a certain amount of roots from the tree when transplanting and still be able to revive the plant. However, palm trees still should be treated carefully.

It is even possible to prune off roots that grow beyond the root ball and the plant will still survive and revive as new roots rejuvenate. This practice may, however, weaken the strength of the tree and make it susceptible to storm damage.

Your trunk and root ball will be dug out for short time.

Do Palm Trees Grow Back?

Some palm tree species grow roots after the trunk is cut, and others don’t. That’s why palm tree stump is an important part of this phenomenon. Most palm tree species can regenerate their roots as long as possible. Be careful about species.

You can cut a few of these roots during transplanting, and the palm tree will survive the transplant. Besides, a fibrous root system causes some troubles to a tree.

Roots growing too far from the root ball

It can also be pruned off without killing the palm tree. The tree will continue growing as new roots will grow. However, this practice may weaken the overall strength of the tree. And future planting can help you to decorate the yard.

How to Remove Palm Tree Roots

When it’s time to remove a palm tree, it is necessary to use a planned approach, which includes removing the palm tree roots. There are many options when looking to remove a palm tree stump or any tree stump for that matter. Removing the roots will ensure that any future growth is prevented.

1.     Cut the palm tree with a trimming saw and leave at least 2 feet of the tree trunk. So, palm trees will not last later.

2.     Dig 18-24 inches around the base of the palm tree trunk using a suitable tool, (a mattock or Pulaski would be good for this), and remove 20-25 inches of soil as you work the roots with the shovel. Note that the root initiation zone needs to be met.

3.     Continue working with the shovel around the root ball, prying it upward. And grown roots won’t happen. As you progress and cut off most of the roots, use the remaining part of the tree trunk as leverage for prying out the root ball. Don’t forget about the hole, indeed.

4.     Remove the root ball from the ground, cut off any large exposed roots, and fill the hole back with dirt. Your palm tree roots will be destroyed as you wanted them to.

Consider using herbicides

To kill the palm roots, apply glyphosate roundup herbicides that are sure to kill the palm roots and the tree. As for short palm tree, don’t worry, they cannot obstacle you.

Why Remove The Stump

There are many reasons why you should remove the stump:

  • You may be up for a penalty, so time may not be on your side when it comes to stump removals. Deal with your stump promptly. The attached roots require more attention.
  • You don’t want to be responsible for someone falling over the protruding stump in the ground. And many other trees also should be treated this way. You previously had a tree (so are not looking out for a stump), or insufficient lighting, causing someone to stumble.
  • Disease or pests can still live in a tree stump – after all, some like termites are particularly fond of wood, and although your tree isn’t there anymore, the wood is not dead yet. These can also migrate to other trees and plants, causing more damage. Well, lose soil and be careful about the tree.
  • It may interfere with your new landscaping plans. The hole will be closed according to your plans.

Palm tree removal

It will not shoot suckers. Once a palm tree is a stump, it will stay just like that. This makes tree removal much more simple. The stump grinder allows you to take all measures correctly.

Chemicals

To remove your palm tree stump, drill holes into the stump about 8 inches deep. Pour your chemical into the holes and top up with a small amount of water. Well, depth is an important feature in the case. Cover the palm tree stumps to keep dry everything outside and soil structure will not be harmed.

Over time, the chemical kills the roots, causing the tree stumps to become deadwood and easier to remove. That’s why stump removal chemicals are an effective action to remove the matter.

The most common chemical

One of the chemicals used for this purpose is potassium nitrate. Apart from it, tree stump should be put away in the right way. By the way, the palms are amazing trees, indeed. It would be advisable to leave usage of these to those trained in stump removal.

Palm Tree Root System Removal

Tips And Reminders For Palm Tree Root System Removal

Each stump removal method mentioned in this post comes with risks. Do stump grinding service in the proper way.

Here are some tips for getting rid of the unsightly stumps:

  • Heavy machinery is a pleasant method of removing stumps.
  • Check your city regulations and community guidelines before setting up your palm tree stump on fire. The root system will be destroyed forever.
  • It is convenient to use a shovel as leverage.
  • Treat while walking or working on covering the ground. That’s why pro tip improves the method.

Final Thoughts

Palm tree stump removal is one step in improving the landscape of your yard. And Epsom salts need to be removed as well. The root system of the palm tree may look intimidating, but with the right tools, you can easily remove the whole stump completely. As you know, a tall tree is difficult to treat.

We hope that this post gave you some ideas on how you can remove the stubborn stump on your property. Notice that roots grow horizontally.

We hope the article is interesting for you.

If you are interested in palm care, we encourage you to check out the research by the UCCE Expert in the Department of Agriculture and Natural Resources of the University of California.

So, palm trees are an interesting topic for discussing, indeed.

How to Cut a Leaning Tree in the Opposite Direction 5 Tips

How to Cut a Leaning Tree in the Opposite Direction – Your Guide

Usually the question is how to cut a leaning tree in the opposite direction so that it does not cause any damage when falling. We will also tell you in which cases it is possible to do this, and when it is worth looking for other solutions.

If there are long-planted trees on your household plot, then sooner or later there will be a need to remove them. This can be dictated not only by the great age and significant size of the crown, which obscures large areas of the garden but also by the running processes of rotting, as a result of which the trunk becomes weak and the tree can collapse, damaging nearby buildings or injuring people.

Sometimes removal is resorted to in the case when the fruit tree does not yield a crop for several years. However, not everyone knows how to cut down a tall tree with a spreading top, and besides, it’s not so easy. And to do this safely, you need to have theoretical knowledge and practical experience.

Preparation for Cutting

Just knowing how to cut down a tree so that it falls in the right direction is not enough. At a minimum, for such work, you still need the necessary physical qualities for this: a high level of coordination of movements, flexibility, strength, endurance. Ideally, it is also desirable to add experience in sawing wood and cutting branches.

If all this is there, then you can start the preparatory stage-the preparation of the necessary tools and materials. You may also need additional tree service equipment.

How to cut a leaning tree in the opposite direction

Before cutting a leaning tree, it is necessary to prepare a properly working chainsaw with a normal chain tension, good sharpening of the links, and a serviceable lubrication system. In addition, you will need to wear comfortable shoes with a non-slip sole with a deep tread, strong work clothes, gloves, and protective glasses or a shield. Prepare a climbing safety system or a mounting belt if you plan to cut down a tree with dropping or hanging. A rope is also useful in the work: it is needed to direct the fall of the tree being cut down.

By the way! For thin trunks up to 30 cm in diameter, take a saw blade with a size of 35 cm, for 30-60-centimeter – 35-65 cm, for thicker-65 cm.

Due to the large noise pollution during the operation of a powerful chainsaw, it is recommended to insert earplugs or wear special noise-proof headphones. To protect yourself from falling branches from above, you should protect your head with a helmet.

Tools for Felling Trees

In order to bring down a tree in a certain direction, professional fellers and not only use special tools. The most common of them are felling forks, wedges, and blades. Special hydraulic or mechanical jacks can also be used.

Wedges can be made of wood directly at the place of felling or bought in specialized stores. Wedges made of polymer materials, the size of which is selected depending on the diameter of the tree being cut, are widely used.

The felling blades work on the principle of a wedge, only they have a lever, thanks to which the operator can increase the force and help the tree to fall in the right direction.

Proper Cutting of the Tree

How to cut a leaning tree in the opposite direction

To properly cut down a leaning tree with a chainsaw, you need to:

  • choose the side in which a leaning tree will have to fall, and the height of cutting;
  • cut down the branches (so that the branches do not injure the feller when the tree falls, you must first cut them down so that the trunk is bare from the height of human growth and to the ground);
  • make the upper file in the trunk (made at an angle of 45° to the ground, its depth should be equal to a quarter of the diameter of the trunk, no more);
  • perform the lower file (made horizontally so that its end connects with the edge of the first file, and a triangular wedge-shaped piece separates from the tree);
  • make a third, felling file (made from the opposite side of the other two files, performed horizontally, parallel to the lower file, 5 cm above it);

Important! When performing the third (felling) file when fell a leaning tree, it is necessary to leave a half-saw, the value of which should be approximately 10% of the thickness of the trunk. To prevent the chainsaw from jamming when performing the most important file, you can use a wedge that was sawn off from the tree earlier.

  • remove the working part of the saw from the saw and quickly move away to a safe distance from the tree being cut (the lower part of the falling trunk may jump due to inertia to a height of one to one and a half meters).

The Order of Work During the Felling of Wood

The execution of the undercuts takes place in several stages.

  • The first (upper) cut is made by a quarter of the diameter of the trunk, at an angle of 45°, you need to approach the tree from the side of the fall.
  • Then a cut is made from below. It is done horizontally to the level where both undercuts will connect.
  • After performing two files, you should get a 45°angle cut in the trunk. Do not cut the tree completely, otherwise it will be impossible to guess in which direction its trunk will fall.
  • Now a fulling cut is used. Before starting work, make sure that there are no people, pets or objects that can be damaged in the fall area. The felling cut is made from the side that is opposite to the intended direction of falling of the trunk, it should be located at a distance of five centimeters from the lower file, parallel to it. When performing a felling cut, leave a half-cut-1/10 of the total diameter of the tree trunk. This is important, as it ensures the correct trajectory of its fall.
  • If you do not make this cut, or make it smaller than the specified size, the trajectory of the tree’s fall will become unpredictable.
  • Sink the saw into the barrel slowly. To prevent the tire from jamming in the trunk, insert the wedge into the main cut before the tree begins to fall. The wedge must be made of plastic or wood; a metal wedge can damage the chain. The engine speed when the saw is running is maximum. While working, watch carefully where the barrel is moving. So you can take timely measures if you feel that the fall has gone in the wrong direction.
  • The unfinished part of the tree is a hinge that prevents falling in an undesirable direction.

When the barrel starts to fall, quickly remove the saw from the cut, turn off the engine and leave the work area. Perform all actions quickly, delay can be dangerous.

It is more convenient to cut the tree in the direction of curvature, the greatest development of branches and branches, if the trunk is flattened – in the direction of a smaller diameter.

Roll in the Direction of Inclination

How to cut a leaning tree in the opposite direction

If the tree is straight and low (up to 4 meters), has a slope of at least two or three degrees, for cutting it down, you can use the technique of felling in the direction of the slope. First of all, it is necessary to decide at what height the cutting will be performed. This depends on the final purpose of the procedure:

  • if the stump needs to be uprooted, the cut is made at a height of 70 cm to 1 m from ground level (the remaining part of the trunk will later serve as a lever);
  • if the stump remains in the ground or it is planned to be removed with the help of chemicals, it is enough to leave 30-50 cm;
  • if the stump is planned to be removed with a crusher, you need to focus on the lifting height of its cutter – you will need to leave about three-quarters of the value of this lift.

A detailed inspection of the tree will help you choose the depth of the file. A healthy plant needs a file for half of the trunk, a patient will have enough preliminary file for 20-40% of the thickness, a rotten one-about 20 %.

Let’s consider how to properly fell a leaning tree in the direction of inclination. First, you should check whether there are no obstacles in the place of the future fall of the tree (in the direction of the slope of the trunk).

After that, you need to make an inscription from the inclined side, which will become a guide. The second, deep inscription is made from the opposite side. If everything is done correctly, after these actions, the tree will begin to fall in the direction of its slope.

How to Cut Down a Leaning Tree

An important moment! If the slope of the tree does NOT exceed 5-7° from the vertical, i.e., for example, the projection of the vertex point of a 10-meter tree is at a distance of no more than one meter from the center of the future stump, then such a tree can be conditionally considered erect.

It is sawn according to the above scheme, but if the roll needs to be made in the opposite direction from the slope, two things should be taken into account:

Remember that after finishing the main cut, you will definitely have to first put the tree in the right direction, while also having to overcome the resistance of the guide chips. It is exposed, as described above, with the help of cables and other means. Also, a guide chip can help in this, if one of its edges is made wider.

The force on the ropes at some point may be too high, therefore it is necessary to use a polis past or a winch to prevent a reverse stroke.

If the slope of the tree exceeds 5-7°, it is better not to try to bring it down in a direction other than its slope, but to resort to other methods (to saw in parts or simply spend time clearing this direction, if possible).

How to Cut a Leaning Tree in the Opposite Direction

A size equal to half the diameter of the tree is required. It can be done from the slope side, or from another side from which you want to” put ” a massive tree;

Creating an incision on the opposite side with subsequent felling;

  • When colliding with large trees, it is necessary to make an inclined upper cut. It is necessary to take into account the cut-off angle-60 degrees. When filing the stem part, 1\4 parts of the diameter is sufficient;
  • It is necessary to make the lower cut of the file in a horizontal form. The file converges with the upper cut. Thus, we will have a side log house;
  • We move on to the second horizontal file (it is higher than the previous one). The file is made strictly from the other side;
  • In the 2nd file, you need to insert a wedge. As soon as the finish is completed, we take a spatula and cut down a tree.

How to Cut a Leaning Tree in the Opposite Direction If There is a House Nearby

How to cut a leaning tree in the opposite direction

If you are a beginner, it is not recommended to perform work on fell a leaning tree (especially large ones) near the nearest houses. There are many factors related to a specific such felling of trees.

  • The slope of the stem part should not be allowed less than 45 degrees;
  • The plant will have both a thin and a high trunk;
  • There may be rotted areas, cracks, hollows, which can be visually noticed.

If there are a lot of houses, engineering networks, communications next to a tree, then we will have very little space for work (otherwise something can be touched). Therefore, experts in such circumstances prefer to cut down trees in parts.

That is, the element is cut down, suspended, then descends. Without special equipment and professionalism, such work should not be performed! The descent of the sawn parts of the tree occurs with the help of other trees located nearby — they are needed to bind the fragments of the tree.

Safety Precautions

To cut down a tree correctly so that it falls in the right direction means to perform a certain algorithm of actions with mandatory compliance with safety regulations. Among the rules to be followed when felling a tree, it is worth highlighting the following:

  • use shoes with thick, strong, non-slip soles and special, tight clothing;
  • carry out the felling only with assistants;
  • check the condition of the chainsaw and its chain before felling, refuel the tool not in a closed room;
  • notify the neighbors and residents of the house near which the felling is planned about the upcoming work;
  • use the technique of a simple one-time cut only on small straight trees with a trunk diameter of 10-15 cm;
  • start working only in a normal mental and physical condition;
  • be sure to use protective glasses and a hard hat;
  • hold the chainsaw with two hands when working;
  • pre-think about where to go when a tree falls;
  • carry out cutting work only in non-windy, non-rainy weather, in the daytime;
  • fasten the safety rope when moving up the trunk in two places.

If you want to know how to cut down a tree with a chainsaw near a house read in our updated article

FAQ

How do you cut down a tree against lean?

The technology of felling large and young trees has some differences, but there are general rules that must be taken into account in the process of work:

  • make an incision for half of the diameter with a chainsaw from the side of the slope or from the side into which the sawn plant should fall;
  • make an incision on the opposite side and bring down the tree;
  • when felling large trees, an inclined upper cut is performed at an angle of sixty degrees relative to the base of the fall side. The sawing of the stem part is performed at 20-25 % of the diameter;
  • at the next stage, a horizontal lower cut of the file is made, converging with the upper cut, which will allow you to get a side frame;
  • then the next horizontal file is performed above the first one and necessarily from the opposite side;
  • a wedge is inserted into the second saw and after finishing the tree, the tree must be felled with a spatula.

Do you cut a tree on the opposite side you want it to fall?

The tree usually asks for the crown itself in one direction. If you need to go there, then everything is simple, cut out the wedge from the side of the fall and saw from the reverse side until it falls.

It is very easy to pull 90 degrees in any direction, for this by making a wedge saw, you start slowly sawing the side opposite to the fall, when the tree goes, you can stop the chain and wait until the remaining fibers pull the tree towards, reaching the right place, we sharply finish the remains of the trunk and it falls where it needs to. It is more difficult to bring down 180 degrees, but it is also possible.

For example, a tree is hanging to the south, and you need to bring it down to the north. We wait for the south wind, we make a drink from the north side, and then the most interesting thing. we start sawing from the south side, but only at the moment when the tree was swung by the wind to the north, and we stop when it returns.

Of course, you can make a mistake, but with a certain skill, you will finish the tree at the moment when it is tilted by a gust of wind to the north side. I had to do such things for many years, there is nothing complicated about it. In order to avoid slipping the trunk off the stump, having made a wedge cut, we saw a little higher from the reverse side, leaving a step, as it were, then the trunk will not jump to your feet when cutting through.

Should I cut down a leaning tree?

There is a risk and it is as follows:

The guide chip, which is formed at the place of the unfinished felling cut to the guide wedge, breaks before the tree has time to start its fall in the desired direction. At the same time, the tree, if it has already been placed vertically by this moment, most likely falls sideways, if it has not had time, then back, or back and to the side – in general, it is not predictable and not at all where the mountain fellers would like.

There is another realizable, but not obvious at first, scheme of emergency movement – the slip of the lump from the stump forward, with the top being held on the stretch and the trunk falling on the stump.

As you have already understood, this danger can be called as follows: “The danger of premature breaking, or the breakage of the guide chips” This danger is greatest for breeds with fragile wood, for example, all willow trees, oaks. The danger increases with poorly predictable properties of wood in the place of under-sawing, for example, for a frozen spruce, or when under-sawing falls on wood affected by rot.

The second unpleasant surprise that awaits inexperienced fellers is that the effort required to quickly put the tree into the vertical and further overturning it turns out to be unexpectedly large-many times more than expected. Therefore, with the necessary felling of inclined trees, they never operate with a drawback “manually” – only through a polis past, with a reverse stroke blocking.

What kind of slope is considered “forbidden”? – For simplicity, 10%, that is, if the removal of the vertex from the vertical is more than 10% of the height of the tree, for example, 2 meters at a tree height of 20m.

What breeds are considered “forbidden” to roll against the slope? – That’s it! Except for obviously fresh birch, and then not with frozen wood!

Read also: Cutting Tree Branches, or How Do I Cut Overhanging Limbs?