Tree Removal Professional

2024-08-102024-08-10

How to Burn a Stump with Diesel – Effective Methods

Stump removal is a complex and difficult process, which requires either serious efforts of one or several people, or special equipment equipped with equipment to perform these works. Therefore, often, instead of uprooting, they resort to burning the stump. This method of removal requires significantly less effort, and in some cases is the only way to properly remove the stump, but it should be used with caution. Today we tell about how to burn a stump with diesel and other methods.

When It Is Possible to Burn Stumps

Bacterial infections affecting the roots and trunks of tree stumps cannot be destroyed by uprooting, because even a small piece of the root remaining in the ground contains these bacteria.

In addition, pathogens are found in the soil surrounding the roots, so even the complete removal of the whole surrounding area root system does not make the soil safe for trees.

During the rise of groundwater caused by rain or other factors, some of the bacteria gets into them and can infect nearby plants. To avoid this, it is necessary to destroy the infection located in the roots and soil, for which the fresh soil either is treated with aseptic substances or heated to a temperature that leads to the death of bacteria.

Treatment with aseptic substances is not always effective, especially on clay soils, due to poor water permeability, so burning is the most reliable way to destroy a stump.

Also, tree stumps are burned if it is impossible to remove the clod and roots in other ways. This is especially true in cases when cutting and uprooting do not lead to the death of the root system and after a while new sprouts appear from the roots remaining in the ground, and treatment with herbicides that kill the plant is unacceptable for some reason.

Types of Burning

There are three main methods of burning stumps, which differ in purpose and execution:

surface;
full;

We will analyze each of the methods in detail.

Surface

For him, the stump is covered with scrap wood, firewood, and dead wood, then diesel fuel and set on fire. As a result, only the aboveground part and a little of the underground part are burned.

This method of burning is not suitable for fighting bacteria and fighting sprouts from root residues. The main condition for the complete combustion of the stump is the use of firewood, the diameter of which is not inferior to the diameter of the stump near the ground. The active burning time is 2-5 hours, then there is a risk of fire from burning coals for another 5-10 hours.

Full

To burn a stump in the ground, a hole is dug around it to release the roots, which are then cut off and used as diesel fuel. For the complete combustion of such a stump, it is necessary to make drilling holes to put firewood together with the roots in the pit, the size of which is not less than the size of the stump in the lowest part.

Burning time is the same as that of the previous method of burning, and the risk of fire from coals persists for 10-15 hours. Monitor the flames to ensure the stump and roots catch fire and burn completely.

Chemical

This method allows you to burn even deep roots without digging them out. To do this, saltpeter or urea is placed in the stump and left for 1-2 years so that the reagent impregnates the wood.

After soaking, the stump is set on fire and lit with a small amount of kindling. Burning is 30-90 minutes, after the end of burning there is no danger of fire, because the wood burns completely, leaving no coals.

How to Burn a Stump

This is a fairly quick way to remove a tree stump. Unlike impregnating the stump with saltpeter, this method is light, does not require much time and leaves the roots of the stump intact in the ground. In order to avoid an underground fire, this method cannot be used on peat soils.

There are two ways to burn a tree stump with diesel fuel.

A metal barrel without a bottom can be installed on the tree stump. In this barrel, you need to periodically burn garbage and eventually the tree stump will burn out completely. This method is best suited for a fresh, recently sawn stump.

You can make a so-called Finnish candle from a tree stump. This method is suitable for dry stumps. Fresh stumps will often go out.

First, a hole is drilled in the center of the stump. The diameter of the hole should not be too small. The diameter from 20mm is best suited.
After that, the second hole must be drilled on the side of the stump in such a way that it connects with the first hole. This side opening is necessary to supply air to the burning zone. For better air supply, you can drill several side holes.
Pour 100-200 ml of diesel fuel or charcoal ignition liquid into the hole, which is used in the preparation of shish kebab.
We make a wick from a cotton fabric and moisten it with a flammable liquid. We lower the wick into the hole.

If the stump does not ignite the first time, then you need to add small dry branches and repeat the arson again.

Safety Precautions

Here is a list of rules that are not prescribed in the documents, but their violation often leads to fires and injuries:

Do not use gasoline or other flammable liquids for ignition, if you accidentally pour your clothes and start a fire, you can get serious burns.
Do not make a fire in windy weather. The stronger the wind, the higher the flame from the burning wood, and the sparks fly noticeably further. In addition, in windy weather, it is easier for a spark or a flown coal to ignite combustible materials than in calm weather.
Do not leave burning wood unattended, if something goes wrong and safety measures cannot stop the spread of fire, then you must immediately start extinguishing it, and if the fire is too strong, call firefighters.
When watching burning wood, always stand to windward (so that the wind blows from you to the fire), so as not to inhale smoke. This is especially important for chemical combustion, because the smoke from saltpeter-soaked wood is acrider than from ordinary wood.

Alternatively, consider using a stump grinder for removing tree stumps, as it is an efficient and cost-effective method that avoids the risks associated with burning.

Other Removal Methods

To destroy stumps, you can use ordinary salt, saltpeter or copper sulfate.

How to Remove a Stump with Saltpeter

Saltpeter significantly increases the ability of wood to ignite, so it is used if the site allows you to build a fire here later. You need to act carefully: after using saltpeter, even the roots under the ground will burn. How to use saltpeter: deep holes are drilled in the stump itself using a power drill with a wood boring bit, you drilled holes as far as the drill allows, fill them with saltpeter, fill them with water, and then they are clogged and left for the winter or until autumn, if the work takes place in the spring. In 5-6 months, saltpeter penetrates the entire root system. Then, as far as possible, you need to choose the ground around and build a fire.

One disadvantage is that nitrates also get into the soil, and they can harm nearby plants. To restore fertility to this place after burning the stump, it is covered with healthy earth and for the first year plants are planted that do not eat, giving a lot of green foliage. These plantings will pull out excess nitrates from the soil, and then you can plant something useful here.

How To Remove A Stump With Copper Sulfate

Copper sulfate also helps to quickly get rid of the remnants of a diseased tree. It, like saltpeter, is placed in holes drilled in the stump using a wood-boring bit or other wood boring bit and left for about a year. Then the stump, as mentioned above, is burned − or the remains of decomposed wood are extracted from burned stump in the usual mechanical way.

A Tool for Removing Stumps

Many chemical products designed to remove stumps are made with potassium nitrate. This compound contains potassium, nitrogen and oxygen, which reduce the time of natural decay from several years to 4-6 weeks. This is safe for the environment and is a fairly fast method. Removal agents are most effective when used on old, dead stumps. If you are dealing with a freshly cut tree, start with a stump killer based on products containing systemic insecticides, such as triclopyr, to destroy all the roots, and prevent the re-growth of shoots.

Apply the chemical to the top of the stump for a few minutes after making a fresh cut, so that the product is quickly absorbed into the remaining stump and roots. If the stump was cut not so long ago, but not 10 minutes ago, then you can use a power drill to drill holes as in the version with salt.

Removing A Stump with Mushrooms

This is another way to turn a stump into dust. To do this, you will need oyster mushrooms or honey mushrooms. Mushroom caps need to be crushed, filled with hot water and shaken well. After this solution is filtered and the stump is watered. To increase the area of moistening, you can make notches in the stump with an axe. To maintain constant humidity, the stump must be covered with branches. It is advisable to moisten the stump occasionally, especially in hot weather. After a few months, the mycelium should germinate.

The average stump will yield mushrooms for about 6 years, then the stump will turn into dust. The remains of the stump can then be easily broken up. The best time to infect a stump with fungal spores is the period from May to August.

FAQ

What is the fastest way to burn a stump out?

The effectiveness of burning directly depends on the method of preparation. If the stump is covered with firewood and burned, then only that which is located above the ground or buried 3-5 cm deep and is located near the fire will burn. You can increase the efficiency of burning by digging up the roots and laying firewood not only on the trunk, but also on them. However, already at a distance of 1-2 m from the fire, if the roots are damaged, they are not such as to completely collapse. Therefore, for effective burning of roots at a great distance from the stump, as well as reducing the volume of land work, wood residues are impregnated with special reagents.

How do you burn a rotten tree stump?

With a long drill on a tree, two maximally deep, communicating channels are drilled into the stump: one vertical in the center, the other at an angle to it. Then pour 100-200 g of diesel fuel or liquid for igniting coals into the central hole (this is better than gasoline, which will burn out quickly), lower a wick made of cotton tape about half a meter long and soaked in the same diesel fuel, and set it on fire. For better gorenje it is necessary to drill a few more side holes in the lower part of the stump and at first maintain the fire. Then it will work by itself. Depending on the quality of the wood — raw and dense or old and rotten — the stump will burn out within about 12-15 hours. By the way, they also practice this option: they just regularly build a small fire on the saw, which slowly but surely burns it to the roots.

Can I use diesel to start a fire?

Just pour diesel fuel over the stump and set it on fire − it will be of little use. Yes, it will not give more growth, but it is unlikely to get rid of it completely. But some summer residents act differently. You can still set fire only to the stump itself, but this is a troublesome, although effective. From the stump, you can make a kind of Finnish candle or just punch two holes to ensure a long and effective burning from the inside. One hole is made in the center deep into the stump, and the second – horizontal − so that it intersects with the vertical one. A wick is placed in the vertical hole – a rag with kerosene − and ignited.

Conclusion

One of the most unpleasant residents on the gardener’s plot is a stump. And okay, if it’s small, from some cherry. Well, puffing for a day or two and you can uproot it. Fortunately, we have a simple and convenient way, and which we talked about in this article.

Burning is one of the ways to get rid of stumps left after cutting or felling trees. Its main advantage is that no special tools or complex equipment are required for incineration.

This method is not time-consuming; it will not require a lot of effort or specialized equipment from you. With this method, you alone can easily remove at least a dozen stumps from your site. There is no secret of deletion, as a matter of fact, there is no.

As a result of the use of an open fire, this process has a drawback: it cannot be used in places where it is impossible to make a fire. Namely, near gas pipelines, houses, overhead power lines, etc.

But in this way, you can remove absolutely any stumps in size and condition: raw or rotten.

After reading the article, you learned:

when it is possible to burn stumps;
how to do it correctly;
what security measures should be followed.

2024-08-062024-08-06

How To Kill A Maple Tree -Professional Advice

The maple tree is a wonderful plant, but sometimes there are reasons why homeowners want to get rid of it. The question immediately arises in a logical way – “How to do it correctly?”

You are a lucky person because you are at the right time and in the right place! This article was created especially for you because now we will describe how to kill a maple tree.

Some people are surprised when a homeowner wants to kill trees in his yard. Such a reaction is clear and understandable. But not everyone understands how sometimes it is not only just desirable but also necessary to kill trees because for some reason they can harm the homeowner and overshadow his stay on his home territory and yard.

However, whatever the reason and motives, no matter what anyone thinks about killing trees, in this article we only tell you how to do it correctly. So let’s get started soon.

How do you kill a small maple tree

There are several best methods you can use in order to kill a small tree.

You can use:

Tordon method
Herbicide method
Roundup method

Basically, these are the main methods that are used to kill the tree. Another issue is that they differ in the ways they are used. Tordon or Herbicide can be used to kill trees in different effective ways. We will describe all this below in the article. But for young trees like a small unwanted tree, it is usually Roundup used as it is the viable option.

Remember that the combination of knowledge of detailed and clear instructions together with compliance with safety rules and existing laws will give a completely successful result.

How to kill a tree without cutting it down

To slowly kill the standing tree safely and effectively, use these methods.

Try to measure about 30 centimeters from the lower base of the tree bark. Then take the Tordon pump sprayer and apply this killing spray on that lower part where is no bark.
To kill a tree with roots, you will need to cut the bark of your tree in such a way that the small “wounds” are in the circumference of the bark of the whole tree. After that, use a strong herbicide such as Roundup or Thordon to coat the tree with this deadly substance.
Get rid of the 10-20 cm wide ring of tree trunk bark around the tree. Use herbicide to coat it with this substance.
Make a few small holes (about 5-10 centimeters deep inside) around the entire trunk of the tree and apply herbicide inside these holes to kill the tree.
You can also use a leaf herbicide to kill a tree less than 4.5 meters tall. Just apply some substance (Roundup) to the leaves.

These five methods will help you kill a tree safely, effectively, and permanently.

Basal bark processing

All methods include only taking Thordon spray. Basal bark treatments involve spraying the substance on the first 30 centimeters from the lower base of the tree bark.

Note that you will only have to use Tordon, and Roundup is not at all suitable for this method because you are dealing with large trees.

Cut surface treatment

This method involves first loosening the natural “fence” that is the tree’s bark protection on the tree’s trunk, and then impregnating the exposed wood with a chemical mixture that kills the tree.

To do this:

To begin with, at the base of the tree for about 15-60 centimeters, make quite impressive and serious cuts. Use an ax to cut off the base at a slight angle.
Make periodically repeated cuts, similar to those you made earlier at the base, only now around the entire circle of the tree.
When you have finished cutting, also known as the surface cut method, and notice that the wood is already exposed, move on to using Tordon or Roundup.
Don’t put off applying. To successfully destroy the roots and prevent the growth of new shoots, it is necessary to cover the sections with the substance as soon as possible.

Well, we will explain what is the meaning of this procedure.

The bottom line is that you penetrate into the vulnerable part of the tree and saturate the wood with a spray that should soak into it and kill the whole tree. By the way, in this case, it makes no difference whether you use Roundup or Thordon, since both substances contain glyphosate, a poison and this is the main thing, because glyphosate is a plant killer by nature.

In the previous method, Roundup cannot be used for the reason that the substance would be too weak to kill your tree and reach the roots without breaking through its bark. Instead, you’ll only get grass and other plants that are young and more vulnerable next to trees damaged by Roundup fumes. In our case, we attack the weak part of the tree and kill it easily.

By the way, when spraying Thordon to kill a tree, do not be surprised that the treated trees turn blue. This is done on purpose so that you can see which areas are being sprayed and which are not.

Barking

Ring barking is a very effective method to kill a tree quickly, which will allow you to kill the top of the plant and its lower part along with all the roots of the trees. You will definitely get rid of all new shoots.

To do this:

Get rid of the tree trunk bark ring. Just cut the wood to a depth of 10-20 centimeters inside in a circle around the entire tree.
Don’t delay and immediately apply herbicide (Thordon Spray or Roundup) to all bare and freshly cut surfaces.

This method will be useful if you want to not only stop growth, but also make sure that all the roots of the tree will not survive by applying the herbicide and you will end up with a completely dead trees root.

Injection

This method is also quite easy to perform and effectively targets the dead tree’s roots. You will need a drill and a roundup or thordon.

To do this:

Use your drill and then start drilling inside your tree (about 4 centimeters deep) following its circumference.
Leave a distance of approximately 5 centimeters when you drill holes.
Make holes that go down at an angle into the base of the tree (45 degrees).
Fill your holes with Tordon or Roundup

This method is most often used by those homeowners who do not want to cause too much mess and dirt in their yard, and who also want to be sure that the killing substance does not get on nearby trees or plants.

Foliar Spray

You can use the Foliar Herbicide as well in order to kill the tree less than 4,5 meters tall. Just apply some substance (Roundup or a selective weed killer) on all the tree leaves.

Advice! Choose the quiet day when you will be sure that the killing substance will not be transferred by the wind from one tree to nearby trees or desirable plants. The early summer and spring will be the ideal seasons for applying herbicide on the small tree leaves early summer.

How to kill and remove a small maple tree

Check this instruction if you want to know how to kill and remove a tree, including how to manage its tree roots effectively.

Cutting the Tree and Branches

manufacturer's instructions, copper sulfate, epsom salt, easiest way

In this case, the first thing to take into account will be the selection of a suitable tool for tree removal. For the small trees, choose the small tools, for the large trees – the large tools. For example, to cut a tree, you will be able to take only the saw that is designed for trees

Especially those with large palm tree, are preferred because then the cutting process of palm tree will be easier. The battery-powered reciprocating hand saw is suitable for medium-sized trees, and full-fledged chainsaws are suitable for large trees.

But another important factor will be safety, because if they fall and you do not provide everything properly, then you risk injuring other species, yourself or your property. Be as careful as possible with large trees and cutting the main trunk, because if you cut it thoughtlessly, it can even fall on your house.

It is better to hire a tree removal specialist if you are not confident in your abilities so that you do not regret that you dropped a tree on a car or house while the tree removal process…

Removing The Stump and Tree Roots

After you got rid of the tree itself, there was an annoying stump? Well, we understand! You know, in fact, we would not advise you to strain too much in removing stumps, because you can just cut it down to ground level and everything will be fine.

Removing soil from a stump is not the easiest and fastest process, so think a few times before starting this business. The grass can grow over the soil and stump if you want. But if suddenly you still do not give up your desire to remove the stump from your garden, then here are some tips for you.

First, dig up the ground around the stump so that the saw fits there. Then start cutting the stump from the bottom with roots. Then bury the ground and plant grass in the garden. That’s it!

Note! A battery-powered reciprocating hand saw will be more suitable for this purpose.

To learn more about how to remove a tree stump, read my article How To Get Rid Of A Tree Stump With Charcoal

How to kill trees and remove a small maple tree

large tree, bleach kill , local regulations, copper nails

Check this instruction if you want to know how to kill and remove a large maple tree.

Cutting the Tree

To begin with, study the prices of services offered by professional specialists dealing with the removal of large maple trees. If you want to do all this by yourself and think that it will cost you less, then let’s check together whether this is really the case.

First of all, you will need at least minimal protective equipment.
Secondly, you will have to get a saw for cutting the trees.
Thirdly, you will pay all the penalties yourself if you suddenly damage something during the removal of trees, while a professional will cover everything with his insurance.

Well, if you still do not deviate from the goal and decide to do everything yourself, then here’s a tip for you.

Cutting large maple trees is the same as cutting small ones, but only in this case, you will have to cut the tree into small pieces starting from bottom branches to top branches or from small branches to big branches. Do not try to cut down all the big trees at once. It won’t end well large tree.

Removing and Disposing of the Stump (Stump grinder using)

Here are the best methods to manage dead wood and remove the debris from the stump. You can burn the stump, grind it with special equipment (stump grinder) or hire a professional and just pay money for the service without worrying about these problems. Of course, the third option will work for sure than if you do it all yourself.

What is the Best Time of Year to Kill a Tree with Herbicide?

dead trees, large tree, early summer, natural resources

When you introduce a chemical herbicide, it means that you are aiming to send this herbicide down to the roots to completely kill the tree and prevent the growth of new sprouts. In autumn, the sap of the tree flows down, which means that all the herbicide solution falls exactly down to the roots with the sap. In the spring, the opposite situation occurs.

The chemical herbicide will not get to the maple trees roots, so choose autumn to apply herbicide to kill the entire tree.

Final words how to kill a maple tree

So, let’s sum up. After reading our article, you have learned all the methods of killing trees. We hope that our instructions have helped you to kill the tree to the last root.

View article sources:

Enlo, S.F. and K.A. Langeland. “Herbicides for the Control of Invasive Trees in Home Landscapes and Surrounding Natural Areas”. Publication No. SS-AGR-127 . University of Florida IFAS expansion, 2016
Stelzer, Hank. “Removing Unwanted Trees from Your Forest: Part I”.

Green Horizons vol. 10, no. 1, 2006.
Stelzer, Hank. “Removing Unwanted Trees from Your Forest: Part 2”. Green Horizons, vol. 10, no. 2, 2006.

2024-07-142024-07-14

Tree Cutting Service Near Me: Best Company

Tree services near my house? Now it’s a reality! Tree trimming services in Lake Havasu City will help you if you need to hang branches or, for example, to remove unnecessary vegetation. Now you can get answers to all questions from Tree Services near Pros! The goal of the tree services is to help you to compare multiple Lake Havasu City tree companies. You no longer need to surf the websites yourself, and the tree services will do everything for you! Local Tree Services Pros offers the lowest tree removal quote and aspires to make your home beautiful again.

Tree Removal Services Near Me

All the Arizona companies that Trees Removed Pros previously analyzed have a license and insurance. There are 2 tree-cutting services in Lake Havasu City. If you wonder, «What service is the nearest to me? », the tree services will answer: «Santa Ana Palms Maintenance and Landscaping.» The closest location is 485 Highland Drive, Lake Havasu City AZ 86404. All tree-cutting companies locations in Lake Havasu City offer the:

Favorable cutting trees and removal prices, including stump removal;
High-quality work;
Pruning and garter trees;
Tree stump uprooting;

Prices of location in Lake Havasu City tree species service depend on the complexity and duration of work. But the average price is approximately $500. The most expensive and hard work is cutting larger trees, clearing hard-to-reach areas, and such types of work that require special equipment. Right now, you can request a quote, and then the tree service will help you estimate the amount for the work that you need.

By the way, trim Trees Pros offers not only limb, trimming, and branch removal, but also tree removal in Lake Havasu City and its suburbs.

If you wonder, «Can the Tree cutting service near my home provide tree removal in Lake Havasu City on the same day I need?», you will receive an affirmative answer. Although everything depends on how much work the tree service has. Be careful and phone them as soon as possible to order the cutting trees services of an arborist. Trees can harm you and your property.

The tree service does its best for your comfort and convenience. Just fill out its request form or call one of the tree cutting companies in Lake Havasu City. At any time you can get a service, compare prices and choose a tree cutting service suitable for you.

In Lake Havasu City it’s not only possible to cut down or remove trees, but also to maintain their condition. You can call A-Z Yard Maintenance to ensure that your trees are healthy. It’s easy to take care of trees and palms with this tree cutting services.

The available services are:

Tree trimming
Tree planting
Tree thinning
Palm tree skinning
Tree shaping

The professional team of A-Z Yard Maintenance with amazing job has gained the trust of hundreds of people. The workers have special equipment and useful knowledge, that’s why your small trees will look healthy. It’s even possible to treat tree for diseases. This tree cutting service also provides complete palm maintenance.

If you still ask the question, «How can I find tree cutters near me?», the ChopDoc tree cutting services will also help you with free estimates. First of all, the tree service that you are going to hire has to have liability insurance, workers’ compensation insurance, and special certifications. If the tree Google search shows you these documents, then it can be considered honest and reliable. Another indicator is accreditation in the Better Business Bureau (BBB) and stump grinding rating for homeowners insurance.

However, a lot depends on you. You should find out if the tree service company is a member of the International Society of Arboriculture or the fallen Tree Care Industry and what reputation the company has. If these requirements are not met, the safety hazard provides low-quality services. Don’t think that a good company will ask you for too much or too little money. Anyway, ChopDoc will help you to find a professional.

Useful Information: TREE REMOVAL COST

In this video you will learn how much to charge for tree removal?

Tree removal company Cost

Service – Cheap – Expensive – Avg.

Tree removal $225 – $3,900 – $871

Tree trimming – $120 – $1,200 – $438

Branch removal – $59 – $750 – $129

Stump removal – $70 – $1,200 – $187

Arborist report – $300 – $550 – $450

Tree cutting service prices

Tree removal cost

The national average so far in 2021 for tree Removal permits is $847. This tree services cost for your yard for a single tree. Tree removal companies’ great prices for the job include tree plants from 15 ft – 80 ft. Cost factors include tree size, type of tree, and the time of year. For a more accurate price, Consult your local tree service professional or the calculator tool below.

Tree trimming services cost

This tree trimming varies depending on the size of the fallen tree and the number of branches being stump removal. Small trees are going to costs less than larger tree. Does the branch stretched out over the roof of a house or is it over a shed or a fence? Tree trimming services generally start at $75 for a single palm trim, but the average costs for tree trimming cost is about $438.

Arborist report cost

This is one service where prices are generally fixed with an average price of $450.

Find the cheap in tree removal costs by:

Internet search “tree removal service + [your city/town]”
Skip page one results and go straight to page two
Eliminate the expensive ones by workload*
Try call during winter |(always cheaper)
Use these FREE services to get matched with the top-voted local tree service professionals.

Chapter FAQ

How much does it cost to cut out a tree?

On average, the tree removal costs start at around $ 450 the hourly rate. The tree removal costs amount includes cutting down the tree and cleaning and disposal of wood. Thus, you get a quick and safe cutting of the tree without wasting your own strength.

Is it cheaper to have a tree cut down or trimmed?

It will be cheaper to the tree trimming than to cut it down completely. Depending on the amount of work, the price tag for tree trimming can reach up to $ 250 in hourly rate, and tree removal services will costs around $ 450 in the hourly rate.

Who chops down trees?

Smaller trees are cut down by specialists who are called woodcutters or arborist. Usually, you can hire them through specialized companies or by finding their resumes on a website for searching for various services. Woodcutters are specially trained in their work for a long time so that they can then cut or cut trees efficiently and safely.

How do you cut down a large tree?

This method is used to tree removal job with a height of 3-6 m.

If they are higher, it is better to entrust their cutting job to professionals.

If the tree has a thick crown, then first you need to remove dead thin and medium branches from the ground, then, putting a ladder to the tree, cut down job higher branches.

When the trunk is cleared of all small and medium branche, you can start cutting job the thickest ones. This procedure will allow you to work in comfortable conditions because thin branches will not interfere with the cutting of the rest.

It is necessary to pruning job off thick branches so that there are convenient platforms with which it will be possible to move around the tree. Only after pruning iob all the branches, you can start sawing the trunk, from which tree trimming with a length of 100-150 cm.

It is undesirable to cut the trunk in longer pieces, because the longer they are, the harder it is to direct them in the right direction, standing on a ladder or on a branch of the trunk.

Conclusion

Tree removal or tree cutting services are very helpful in many situations. It is especially good if such services are found near you. Pay attention to reviews and recommendations before hiring workers. Look for the best options and then everything will be fine.

We hope that you were able to find all the answers to your questions.

2024-07-142024-07-14

Emergency Tree Removal Near Me In CT

What will you do if you need to delete a tree urgently? Personally, I will start looking for emergency tree removal near me. It is very important because you have to do something about this problem. So, let’s take a detailed look at our actions on the example of cutting tree branches and tree cutting services near me.

Remove Diseased, Pest-Infested and Dead Trees

The specialists at Hayes Service love trees, but we also have to resort to removing them when they can’t be helped. Although we do our best to restore damaged trees, sometimes they can’t be saved. In this case, you will need our prompt services to remove trees quickly.

Dead trees are not able to grow and recover, and they are also a huge danger. That’s why you need tree-cutting companies near you.

Emergency Tree Removal Near Me: Professional Services (2021) — A man cuts down a tree

Let our tree cutting service take care of this. We use the most advanced technologies in this field to effectively and safely remove deadwood. We use our own equipment, and do not use the services of other employees, and do not use other people’s equipment.

What does this mean for you? This means that our services are more affordable and of higher quality than those of other tree removal companies in this area.

We are a local company that uses the resources of a national business, so our customers can expect a high-quality service that is fast, and our staff is extremely friendly.

Useful Video: Emergency Tree Removal Near Me

In this video, you can see the professional work of a tree service company that has the best and efficient equipment to provide affordable solutions to meet your needs for pruning and removing trees.

What Should I Do If a Tree Falls?

If a tree has fallen, whether due to a storm or weak roots, Hayes Tree Service will provide its emergency services. Fallen trees should be removed as quickly as possible. Especially if they fell on your house or any other vital structures. Learn more about our emergency services by visiting our page.

Why Should You Choose Our Company?

The answer to this question is simple – we care about our customers. As for us – we don’t just cut down trees and branches. We try to be the best company in the industry, while also improving the environment.

Tree maintenance is the best way to achieve this. We are always ready to show up at your home dressed in professional clothing, offering our upfront prices as well as a friendly smile.

A man cuts down a tree — Tree Removal Near Me

Providing affordable, professional services in Connecticut, Hayes Tree Service offers solutions to tree care issues, as well as tree removal services in Middlesex and New London County.

If you are looking for efficient and professional tree removal and pruning services, in Groton CT, Mystic CT, or Waterford CT, then you have come to the right place. Allow our company, which has the equipment, license, and insurance, to provide affordable solutions to meet your needs for pruning, cutting tree branches and removing trees.

We are ready to serve You.

Do You Need Tree Maintenance In CT?

Our company is here to provide you with the necessary services. Just give us a call and we will gladly provide you a FREE (Yes, free) Estimate for your tree removal, tree trimming or stump grinding! We are based out of East Lyme CT but travel to nearby areas for all types of tree care.

Just call us and we will help you solve your problems.

2024-03-142024-07-14

Where to Cut Your Own Christmas Tree Around Philadelphia and the Main Line

If you wonder where you can cut your own Christmas tree, then we advise you to visit the Christmas tree farm this year. You may have never heard about this place, but it will be a great excuse for your family to spend time together!

Why should you choose a special farm?

Pine trees are specially grown on these farms, you don’t need a tree cutting permit and you can always take one of them home for Christmas and decorate with the whole family. So, a truly festive atmosphere will reign in your home.

Buying a Christmas tree on a farm is better than buying a Christmas tree in a shopping center parking lot, as many people do.

In addition to this, many people have recently complained about spotted lanternflies on their Christmas trees. To avoid this, take the advice of professionals from Philadelphia and go straight to the farm. There you can cut your tree or order this service.

We advise you to contact the company in advance to find out if they have trees and specify the time when you can do it. Prepare carefully: take special equipment with you and put on clothes that you do not mind getting dirty. Stock up on a thermos of hot chocolate to keep warm after hard work!

Go to the farm after you have completed the required steps.

We will tell you about the places to cut down Christmas trees around Philadelphia and the Main Line.

Chester County

You can cut your own Christmas tree on two farms in Chester Country: Marsh Creek Tree Farm and Tricolor Tree Farm.

Marsh Creek Tree Farm

This place offers a selection of over 30,000 trees ranging in height from 6 to 16 feet. Other farm services are also available to you:

wagon rides
buying decorations for your tree (wreaths, garlands)
free hot chocolate
souvenir shop

The farm also sells B&B trees (Ball and Burlap) which can be planted at any time. The staff will definitely provide you with a saw and guide you to the right place. In addition, there is a hayride on the farm that will help you in case of injuries or falling of a tree.

When you return with the tree, you will receive a cup of free hot chocolate. Everything here is created for your comfort!

Tricolor Tree Farm

Tricolor Tree Farm is a place for a wonderful family winter holiday nestled between West Chester and Downingtown. The 55 acres of land has a large number of Christmas trees that you can cut down yourself, or the drilling and packing service will do it for you.

Available time for visiting is Friday, Saturday, and Sunday from 9 am to 5 pm (starting from November 23 to December 23).

Cut your own tree, choose decorations, and then taste the delicious hot chocolate.

For details visit the farm’s website or call 610-269-1034.

Where To Cut Your Own Christmas Tree - 8 Basic Places — Cut your own Christmas tree

Bucks County

If you live in Bucks County, visit the AGA Farms and the Tuckamony Farm which are places to cut down Christmas trees.

AGA Farms

The preserved farm has an area of 100 acres where you can also meet friendly dogs. Here you have a large number of services available: self-cutting a tree, buying an already cut down tree, or a tree with roots that you can plant after the holidays.

Children love playing with the animals on this farm. Parents will be happy when the workers bring their tree into a good condition (clean, file, tie) and attach it to the car. There is also a shop on the territory where you can buy gifts and various decor items.

The farm is open every day from 10 am to 5 pm. If you want to know more, call the farm on opening day at 215-795-0660 or visit the website.

Tuckamony Farm

It is one of the oldest Christmas tree farms in the country. This place is specially designed for self-cutting of a tree, but there are also already felled Christmas trees, fresh holly, and hand-made wreaths for decoration.

The farm is open every day from 9 am to 5 pm (even on Saturday and Sunday), but closed on Mondays.

Have any questions? Call 215-862-9510 or view information on the website.

Delaware County

If you are from Delaware County, visit the Linvilla Orchards farm. Take a hayride over the rolling hills of this farm and stroll through the evergreens for your perfect tree. Or you can also buy a sawn tree.

This is the place for a real family vacation! Feel the winter atmosphere and roast marshmallows over a fire or have an apple cider. The following services are also available for you:

Visiting Santa in December;
Handicraft classes at the Garden Center on weekends;
Running around the Playland Playground;
Visiting the Barnyard animals;

Want to know more? Check the farm’s website or call 610-876-7116.

Montgomery County

Montgomery County has the largest number of places to cut down Christmas trees. Choose a farm closest to you and enjoy the time spent with your family!

Boswell’s Tree Farm

The farm has been run by a local family for over 70 years. Boswell’s Tree Farm is a hidden gem of the State and really worth your visit because it preserves the traditions of Christmas.

The owners of the farm will make a great impression on you: they are friendly, open-hearted, and happy to answer your questions.

The farm has a wide selection of beautifully shaped trees that you can buy at reasonable prices. Here you will find all the necessary equipment: a machine for picking trees, a rope for tying a tree to your car, and much more.

But all services are available only for cash payment, so do not forget to go to the ATM in advance. Here you will definitely find your perfect Christmas tree!

Hague’s Christmas Trees

Choose any tree you want in the field. Plus, Hatfield’s team offers fresh-cut trees and even wreaths for your Christmas tree. This farm is a family business and the owners provide decent service to all clients.

It is open from Thanksgiving until December 24th. On weekdays you can arrive from 1 pm to 8 pm, and on Saturday from 9 am to 5 pm.

If you want to know more details, call 215-368-4542 or visit the website.

Useful Videos: Cut Your Own Christmas Tree

In these videos, you can see how and where and you can cut your own Christmas tree

Corkum Tree Farms

Corkum Tree Farms in Collegeville will satisfy all your needs and present the best Christmas tree. On this farm, you can cut down the tree yourself or buy a freshly cut tree that is already prepared for transportation on the roof of the car.

A professional team has been in the industry for over 20 years and knows exactly how to create a festive atmosphere.

Everything you want is here:

wreaths
garlands
greens
holly
boxwood
blankets
rope
and even knitted hats and gloves

All these accessories and other necessary equipment can be found in the barn after you receive your tree. The farm opens on November 29 and works according to the following schedule: from 8 am to 8 pm on weekdays and from 8 am to 6 pm on weekends.

If you need more information, visit their website or call 610-489-3448.

Varner Farms

Picking up your own Christmas tree at Varner Farms in Collegeville will definitely appeal to you if you’ve already picked your pumpkins this season. This farm is a family-run business with top-quality service.

If you want to cut your own Christmas tree, a Belgian horse-drawn or a tractor-pulled wagon will take you to fields of over 90 acres.

But there are times when you don’t like cutting down the tree yourself. Then you can buy a pre-cut tree. On the farm, you will be invited to enjoy delicious hot chocolate or apple cider while the workers tidy up your tree.

Visit also the gift shop, farm animals, and train exhibitions. The farm is open from 8:00 am to 4:30 pm Monday through Saturday and from 10:00 am to 4:00 pm on Sundays.

Check the farm’s website or call 610-489-8878 for details!

Cookie	Duration	Description
cookielawinfo-checbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.